doc. no : qw0905-LHR3630 rev. : a date : 21 - oct. - 2005 data sheet LHR3630 super bright round type led lamps ligitek electronics co.,ltd. property of ligitek only
note : 1.all dimension are in millimeter tolerance is 0.25mm unless otherwise noted. 2.specifications are subject to change without notice. 75% -60 75% 100% 50%0 25%25%50% directivity radiation 0 -30 30 60 100% 1.5max 2.0 25.0min 1.0min 2.54typ 0.5 typ 13.5 11.0 10.0 ligitek electronics co.,ltd. property of ligitek only package dimensions part no. LHR3630 page 1/4 + -
absolute maximum ratings at ta=25 typical electrical & optical characteristics (ta=25 ) note : 1.the forward voltage data did not including 0.1v testing tolerance. 2. the luminous intensity data did not including 15% testing tolerance. tstg red diffused lens color tsol t opr pd i fp symbol gaalas LHR3630 emitted red material part no ir reverse current @5v soldering temperature operating temperature storage temperature i f power dissipation peak forward current duty 1/10@10khz forward current parameter part no. LHR3630 66020 1.5 2.4 min.max. 120260 min. typ. 42 spectral halfwidth nm peak wave length pnm luminous intensity @20ma(mcd) forward voltage @20ma(v) viewing angle 2 1/2 (deg) 10 a max 260 for 5 sec max (2mm from body) -40 ~ +85 -40 ~ +100 unit ma mw ma 30 100 100 hr ratings ligitek electronics co.,ltd. property of ligitek only page 2/4
fig.3 forward voltage vs. temperature fig.5 relative intensity vs. wavelength ambient temperature( ) r e l a t i v e i n t e n s i t y @ 2 0 m a wavelength (nm) f o r w a r d v o l t a g e @ 2 0 m a fig.4 relative intensity vs. temperature ambient temperature( ) r e l a t i v e i n t e n s i t y @ 2 0 m a typical electro-optical characteristics curve forward voltage(v) fig.1 forward current vs. forward voltage f o r w a r d c u r r e n t ( m a ) forward current(ma) fig.2 relative intensity vs. forward current r e l a t i v e i n t e n s i t y @ 2 0 m a ligitek electronics co.,ltd. property of ligitek only 1.0 0.1 1.0 10 100 1000 1.0101001000 0 0.5 -40-20-020 600650 0 2.03.04.05.0 4060 0.8 -0 -20 -404060 20 0 0.5 0.9 1.0 1.1 1.2 1.0 1.5 2.0 650700750 0.5 1.0 1.0 1.5 2.0 2.5 3.0 100 80100 80 2.5 3.0 hr chip page3/4 part no. LHR3630
this test intended to determine the thermal characteristic resistance of the device to sudden exposures at extreme changes in temperature when soldering the lead wire. mil-std-202: 210a mil-std-750: 2031 jis c 7021: a-1 mil-std-202: 208d mil-std-750: 2026 mil-std-883: 2003 jis c 7021: a-2 1.t.sol=260 5 2.dwell time= 10 1sec. 1.t.sol=230 5 2.dwell time=5 1sec solder resistance test solderability test this test intended to see soldering well performed or not. reliability test: mil-std-750: 1026 mil-std-883: 1005 jis c 7021: b-1 jis c 7021: b-12 mil-std-883:1008 jis c 7021: b-10 mil-std-202:103b jis c 7021: b-11 mil-std-202: 107d mil-std-750: 1051 mil-std-883: 1011 1.ta=-40 5 2.t=1000 hrs (-24hrs, +72hrs) 1.ta=105 5 &-40 5 (10min) (10min) 2.total 10 cycles 1.ta=65 5 2.rh=90%~95% 3.t=240hrs 2hrs high temperature high humidity test thermal shock test low temperature storage test the purpose of this test is the resistance of the device under tropical for hous. the purpose of this is the resistance of the device to sudden extreme changes in high and low temperature. the purpose of this is the resistance of the device which is laid under condition of low temperature for hours. test condition 1.ta=105 5 2.t=1000 hrs (-24hrs, +72hrs) 1.under room temperature 2.if=20ma 3.t=1000 hrs (-24hrs, +72hrs) high temperature storage test operating life test test item this test is conducted for the purpose of detemining the resisance of a part in electrical and themal stressed. the purpose of this is the resistance of the device which is laid under ondition of high temperature for hours. description reference standard ligitek electronics co.,ltd. property of ligitek only part no. LHR3630page 4/4
|
